TerrieViramontes593: Unterschied zwischen den Versionen

Aus daten-speicherung.de
Zur Navigation springen Zur Suche springen
(Die Seite wurde neu angelegt: „Learning building your own COMPUTER from scratch can be quite a very difficult task if you know nothing about pcs. However once you figure out how to do it as …“)
 
(kein Unterschied)

Aktuelle Version vom 10. Mai 2012, 14:31 Uhr

Learning building your own COMPUTER from scratch can be quite a very difficult task if you know nothing about pcs. However once you figure out how to do it as well as understand exactly how to handle it, it actually turns into quite enjoyable having the ability to easily strip down and increase old or brand-new PC's. I would prefer to take this chance to lay out the fundamental components of a computer and help you figure out how to build a computer from scratch.

PC Components

The most common pc components that you will have to have are the actual mouse, keyboard, hard drive, floppy drive, ram chips, sound and visuals card, power supply, motherboard and keep track of. I'm assuming that you will know what these components look similar to. If you are generally unsure about some components just seek out pictures of them on the internet and you might find what they are.

Connection Process

Firstly you have to do business with the mother board as well as the mother board installation plate. Firstly, gently screw the actual motherboard onto the mother board plate with all the notches or screws which has been provided with the particular package or kit. Once this is done you simply must insert the COMPUTER (Central Digesting Unit) in to its slot on the motherboard. Sometimes these PC sockets have levers which you have to gently release in order to open it up so pay attention to that. Gently slide the CPU into its socket ensuring that the pins about the backside slide inside correctly otherwise it could get damaged. You can right now clip the lever back into place and make certain it is safe.

Now you should attach the heatsink to the CPU chip. You might discover that the CPU already includes the heatsink/fan attached with it then you definitely can read more. Now you should connect the little cable from your heatsink fan on the corresponding socket on the motherboard to supply it power.

The next step is to place the ram chips into their respective slots which can be long and thin. Once this continues to be done you may mount the motherboard growing plate onto the medial side of the personal computer and screw/slip it in so that it is attached effectively.

The power supply could be the next component to handle. The power supply area is usually located at the rear of the pc case and is also indicated with screw holes that happen to be unoccupied. Just try as well as maneuver it around to adjust to with the corresponding holes before you screw it inside. The power supply includes a main system connector which gets connected to the power slot for the motherboard, a floppy energy connector which gets plugged into the floppy drive and a few standard peripheral electrical power connectors (crimson, yellow and dark-colored wires) which get connected to your hard hard disks and cd roms. You will ought to mount the computer drives, cd roms along with floppy drives and also connect them along with those connectors ensuring that the red cable on each power connector is pointed inwards towards motherboard. I'll explain exactly why below.

Right, now we move onto the 2 ports on the actual motherboard called the key and secondary IDE Locations. You will notice them while they are rectangular along with brackets around these people. these ports are utilized to connect the hard disk drives and cd roms. The cables that get plugged into these two ports are 40 pin IDE cables together with have 3 connections on each cable. Make sure the longest the main cable is connected to the IDE slots. You need for connecting the primary IDE cable through the motherboard to the particular hard drive(s) and also the secondary IDE port is used to connect your own DVD Roms for a motherboard. When you plug these IDE cables in to the cdroms and hard drives ensure that the red line strip is side-by-side with the reddish wire strip in the power connectors that happen to be connected to people devices. Consult your manual for those who have one to find out how to use the different jumpers to switch between master along with salve drives upon each port. This will allow you to choose which drives are primary and also secondary.

Now that the ability supply is attached to the motherboard and the various other components you simply must plug graphics and sound card within their slots. Once this is done make sure you connect the the front panel connectors for the corresponding LED lights which means that your lights will make an appearance when the computer boots. Failure to do so can lead to non function from the system.

Lastly make certain everything is linked properly. This includes the particular external mouse, keyboard, monitor cable and also power cables so your computer will switch on and function appropriately. If all is completed well then it ought to be okay.pc